Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED’s display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
Tripp Lite by Eaton PDUMH20HVATNET PDU – TAA Compliant
Tripp Lite by Eaton PDUMH20HVATNET PDU – TAA Compliant – Switched – 8 x IEC 60320 C13, 2 x IEC 60320 C19 – 230 V AC Input – 200 V AC, 208 V AC, 220 V AC Output – 1U – Vertical – Rack-mountable
- 200 V AC output voltage for maximum dependability and added productivity
- 200 V AC output voltage for optimal performance with maximum feasibility
- 230 V AC input voltage for optimal performance with maximum usability
- IEC 60320 C13 receptacle type to ensure maximum productivity with added feasibility
- IEC 60320 C13 receptacle type to ensure maximum usability and reliable power output
- With a built-in digital current meter avoid potential overloads via switched PDUs
Out of stock
Future Stock on Order: 4
Due in Stock: 01/05/26
£684.17 Exc. VAT / £821.00 Inc. VAT
Secure Payments: Protected checkout with trusted payment providers.
Fast Shipping: Orders dispatched within 1–2 working days.
Condition: Brand New & Sealed. Sourced through manufacturer’s authorised UK channels.
General Information
| Product Type | PDU |
|---|---|
| Manufacturer Part Number | PDUMH20HVATNET |
| Manufacturer Website Address | https://tripplite.eaton.com/ |
| Marketing Information | Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. |
| Manufacturer | Eaton Corporation |
| Product Model | PDUMH20HVATNET |
| Product Name | PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet |
| Brand Name | Tripp Lite by Eaton |
Power Description
| Input Voltage | 230 V AC |
|---|---|
| Output Voltage | 200 V AC |
Physical Characteristics
| Weight (Approximate) | 4.67 kg |
|---|---|
| Mount Type | Rack-mountable |
| Rack Height | 1U |
| Height | 43.7 mm |
| Width | 439.4 mm |
| Depth | 375.9 mm |
| Mounting Orientation | Vertical |
Technical Information
| Receptacle Type | IEC 60320 C13 |
|---|---|
| PDU Type | Switched |
| Receptacle Detail | 8 x IEC 60320 C13 |
Miscellaneous
| TAA Compliant | Yes |
|---|
